As mentioned in my last post, Coravin allows you to extract wine from a bottle without removing the cork. A hollow needle is inserted into and through the cork. Argon, an inert gas, is then pumped into the bottle through the needle to pressurize it, allowing wine to be drawn out through the same needle. Argon then displaces the space left by the wine. The wine in the bottle maintains minimum contact with air, preventing oxidation. The cork then reseals from the needle hole naturally.
|Coravin Model Two Plus Pack
So here is my first try at using my brand new Coravin Model Two. I am super excited to extract some wine from my bottle of 2012 Joseph Drouhin Gevrey-Chambertin 1er Cru Les Cazetiers. The drinking window for this wine is from 2019 to 2040, and I plan to taste it every year or so. (It probably won't last through 2040.)
A note about the instruction manual...
The multi-lingual "Getting Started" instruction manual that came with my Model Two was generally inadequate. It would have been better if it just pointed to the Coravin website, which it didn't. The Coravin website contains a robust set of instructions, both static and video. So if you are using the Coravin for the first time, just go to the website.
Step 1 - Familiarize yourself with the Coravin system
Compared to a regular wine opener, the Coravin system does have more components to consider. It is of course not a wine opener after all. Still the numerous components can be overwhelming at first glance. Take a look at the Coravin Model Two picture (see below) to get the lay of the land of all the components.
|Coravin Model Two Components
Start with the needle (4). There should be a yellow needle cover at the sharp point of the needle to protect it from damage during shipping. Remove the cover.
Unscrew the capsule cup (8) from the system, insert the argon capsule (7), and screw the cup back.
Press and release the trigger (1) quickly to test the argon release. You should hear a hissing sound.
When using the Coravin, it should be positioned the same way you see in the picture above. The handle (2) is at the top, and the capsule cup (8) is at the bottom.
While it may be optional, I would remove the foil from the bottle so that I can see the cork. It is important that the bottle has a natural cork. Synthetic corks do not reseal after a hole is punctured through them.
|Clamping and positioning the bottle
The instruction manual didn't indicate any of that so I didn't use the sleeve. Thankfully, I did not have any bottle issue. I suspect that Coravin has since figured out how to better manage the pressure increase.
Step 3 - Clamp the bottle and position the needle
While holding the Coravin upright by the handle (2), squeeze the clamp (6) to open it and release to close it. It works very much like a clothes peg or a hair claw. Use the clamp to secure the neck of a bottle.
Release and tighten the clamp as you adjust the position of the bottle till the needle guide (5) rests somewhat in the middle of the cork. This is to ensure that the needle goes through the cork safely without hitting the bottle.
Step 4 - Insert the needle and extract the wine
Once you are comfortable with the position of the needle guide (5), push the handle (2) all the way down firmly but gently. That pushes the needle straight down through the cork.
|Pouring the wine
Quickly press and release the trigger (1) to release the pressurized argon into the bottle. Your wine should be streaming out of the pour spout (3) into the glass. Repeat this action till you get the desired amount of wine. If needed, hold the bottle upright to stop the flow of the wine.
Step 5 - Remove the needle and detach the Coravin
Once you are satisfied with the amount of wine in the glass, place the bottle upright with the Coravin still clamped to it. Holding onto the bottle with one hand, lift the handle (2) firmly straight up with the other hand to extract the needle completely from the cork.
Squeeze the clamp (6) to release the bottle from the Coravin. You may see a drop of wine from the needle hole in the cork. This is completely normal. Give the cork time to reseal and then wipe it dry. It took me a few minutes.
|Drop of wine surfaces on the punctured cork
|Cork has resealed, and there is no leakage
I put a little post-it note on the bottle with the date I extracted the wine. Then I lay the bottle sideways in the cellar. Here's the geeky part - I started a spreadsheet and put down the tasting notes of the wine with the date that it was tasted. I look forward to trying the wine again in a year or two and compare notes.
|Coravin Tasting Notes